AircoSaverUSA

The AircoSaver (measuring approx. 9"x 2"x 2") is designed to be installed into existing systems as an after
market fit. Installation is simple and takes approximately 15 minutes (depending on local situations). A
detailed, step-by-step installation manual is provided with each unit.

Please Note:-----Installing and servicing air-conditioning equipment can be hazardous due to system
pressures and electrical components. Although AircoSaver installation is quick and simple, it should ONLY be
performed by trained electricians or HVAC contractors to ensure proper system setup and maximum savings.

The standard version is suitable for most residential and light commercial DX (direct expansion) A/C systems
such as single splits and small packaged units, as well as window or wall-mounted units.

If you would like to use it on larger systems, industrial units or on different applications such as reverse cycle
air conditioning (incl. heating) or cold storage cooling, please contact us for customized versions.

The standard AircoSaver should not be used with chilled water systems, evaporative cooling systems, the
latest inverter type split systems, and multi-split systems.

No retrofit will do miracles. There is always a limit to the possible improvements in energy efficiency. A retrofit
will not remedy major planning mistakes, technical faults in your system, or improve upon the type or
efficiency of the refrigerant in the system.